Setting The Machine Id - Dell 3115 Color Laser User Manual

NOTE: In case of either one, w configure the languages setting, the information, which
is register e device, is initialized.

Setting the Machine ID

In most , you are required by law to indicate your fax number on any fax you The Machine
ID, containing your telephone number and name or company ill be printed at the top of each
page sent from your multifuncti
1. Press >SETUP appears, and the
2. Press until >Admin Menu appears, and then press
3. Press until >Fax Settings appears, and then press
4. Press until >G3ID appears, and then press
5. Enter your fax number using the num d.
NOTE: If you make a mistake while entering number
6. Press the number on the display is correct.
7. Press unt >Send Header Name appears, a press
8. Enter your name or company name using the number keypad.
You can enter alphanumeric characters u number keypad, including special symbols
by pressing the 0 button.
Fo s on how to use the number keypad to enter alphanumeric characters, s
the Number Keypad to Enter
9. Press when the name on the display is correct.
10. Press Cancel to return to the st de.
sing the Number Keypad to Enter Characters
As you perform various tasks, you may need r names and numbers. For example, when you
set up your multifunction , you enter your name or your company's name and telephone
number. Wh store speed dial or group dial numbers, you may also need to enter t sponding
names.
.
.
to delete the last digit.
Chara(See 18.)".
.
.
Using