Connecting The Telephone Line - Dell 3115 Color Laser User Manual

The IP address is assigne multifunction printer. To verify the setting, open the web browse
computer connected to the network and enter the IP address into the bar on the browser. If
the IP address is set up correctly, the Dell Printer Configuration Web Tool displays in ser.
You can also assign the IP address to the multifunct ter when installing the printer drivers
with installer. When you use Network Installation feature, and the Get IP Address is set
to AutoIP on the operator panel menu, you can IP address from 0.0.0.0 to the desired IP
address on the printer s ndow.
Verify the IP Settings
1. Print another system settings page.
2. k under the TCP/IP heading on the tings page to ensure that the IP address,
netmask, and gateway are u expected.
or
Ping the multif printer and verify that it responds. For example, at a command promp
network computer, type ping followed by the new printer IP address (f le, 192.168.0.11):
ping 192.168.0.11
If the multi printer is active on the network, you will receive a reply.

Connecting the Telephone Line

NOTE: Do not co our multifunction printer directly to a DSL (digital subscriber li may
damage the multifunction printer. To use a DSL, you will need t appropriate DSL filter.
Contact your service provider for the DSL
1. Plug one end of a telephon cord into the Wall Jack connector and the other end into
an active k.
2. a telephone and/or answering machine to your multifunction printe the telephone or
answering machine line cord into the Phone connecto ).