Original Type setting is used to improve the image quality by select document type for the
current copy job.
To select the image quality:
1. Load the document to be copied on the document fe s, and close the cover.
2. ess
unt >COPY appears, and then p
3. Press
until Original Type appears.
4.
to selec sired settings, and then press
Text&Photo* Uses for documents with both text and photo/gray tones.
Ph
U documents with photo or gray tones.
Best
Uses for documents with fine text of olution.
Text
Uses for documents with text.
5.
5. Press Start to begin copying.
Lighter/Darker
Adj contrast to make the copy lighter or darker than the original.
To adjust the contrast:
1. Load the document to be copied on the document feeder glass, e the cover.
2. Pre
until >COPY appears, and then press
3. Press
until ter/Darker appears.
4. Press
to select the desi ings, and then press
ks well with standard typed or printed documents.
Darker1 Works well w print or faint pencil markings.
Darker2
Darker3
.
.
.
.