Dell 3115 Color Laser User Manual page 189

4. Press until >Initialize NVM and then press
5. Press select >User Section or >System Section, and then pres
6. The Ar ure? message appears on the operator panel. Press
7. The multifunction printer is turned off automat ply the settings.
Initializing NVRAM for Network Settings
You can initialize the IP address and network-related setti nitializing NVRAM for Network
settings.
1. Press until >SETUP appears, and then press
2. Press until >Admin Menu appears, and then press
3. Press until >Wired Net or Wireless appears, and then press
4. Press until >Reset L or >Reset MPC appe then press
5. The Are you sure? message appears on the operator pane
6. Turn off the multifunction printer, n on again to apply the settings.
13. Understanding Menus
When your multifuncti is configured as a network printer available to a number s, the access
to the Admin Menu an be limited. This prevents other users from using the operator
inadvertently change a printer user default that has been set by th strator.
However, you can use your printer drive de printer user defaults and select settings for
individual print
Using the Copy Me
Usin an Menus
Using the Fax
Using the Job Status Menus
Using the Setup Menus
Setting of Panel Lock
Us Copy Menus
.
.
.
.
.
.
.