Adjusting Color Registration - Dell 3115 Color Laser User Manual

Adjusting Color Registration

To adjust the color registration when you first install th unction printer or after moving it to
a new location, follow the p low. See
for informatio the operator panel.
Printing the Color Registration Cha
Use the operator panel to pri color registration chart.
Press until >SETUP appears, and then press
Press until >Admin Menu appears, and then press
Press until >Maintenance ap d then press
ess unti >Color Reg Adjust appears, press
Pr until >ColorRegi Chart appears, and then
The color registration chart is printed.
Det ues
From the lines to the right of the Y (Yellow), M (Magenta) C (Cyan) pattern, find the values
of th htest lines.
NOTE: You can also use the densest colors o lattice pattern to find the straightest lines.
The colors printed at est density are those next to the straightest lines. When 0 is the
rest the straightest line, you do not need to adjust the color regis When the value is not
0, follow the procedure outlined in
ntering Values
"Operator Panel(See 11.)" a
.
.
.
.
.
"Entering Values(See 25.)".
Color Reg Adjust(See 13.)"