Dell 3115 Color Laser User Manual page 143


Select Computer t er (ad hoc) networks only and close the nced dialog
box.
wireless infrastructure mode is set to the multifunction printer:

Selec Access point (Infrastructure) networks only lose the Advanced
dialog box.
Select the setting that you send to the multifunctio in the list in Preferred
o
Network gr
Click Move up to move the setting to the top of the lis
o
Click OK the Property dialog box.
o
F ws Vista:
a. Open Control Panel
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Connect to a network.
e. lect the original setting from the network items listed in Connect to a
network, and then click onnect.
For Windows Server 2008:
a. Open Control Panel.
b. Select Network and Sharing Center.
c. Select Connect to a netw.
d. Select the original setting from the net listed in Connect to a network, and
lick Connect.
11. On the Setting-Ready Printer , verify that the correct IP address is assigned to the
multifunct to which the wireless setting is set, and then click Install.
: If your system has any of the following operating sy
- Windows XP x64
- Windows Server
- Windows Server 2008x64
- Windows Vista x64
- Windows Vista x86
,skip step 12 to step 13.
12. If you select the I am setting up t on server check box on the Select screen and
also select the PostScrip check box on the Enter Printer Setting screen, the
Adobe Systems Inc. License Agr screen appears. Select the I accept th of the
license agreement option button, and then click Install.
®
64