Wired Network - Dell 3115 Color Laser User Manual

To specify the way to select the tray for PostS . The change becomes effective after the
unction printer is turned off and then on again.
Value:
Auto* The tray is selected as th setting as in the PCL mode.
Select From T The tray is selected in a method compatible with st Script printers.

Wired Network

Use the Wired Network menu to change print ings affecting jobs sent to the multifunction
printer thr e wired network.
NOTE: Values marked b sterisk (*) are the factory default menu settings.
Ethernet
Purpose:
To specify the ction speed and the duplex settings of Ethernet. The change be ffective after
the multifunction printer is turned off a on again.
Values:
Detects the Ethernet settings automatically.
0 Base Half Uses 10base-T half-duplex.
10 Ba Uses 10base-T full-duplex.
100 Base Half Uses 100base-TX half-duplex.
100 Base Full Uses 100base-TX full-duplex.
TCP/IP
Purpose:
To specify the TCP/IP settings for the wired network. The ch comes effective after the
multifunction printer is turned off a on again.
Values:
1
IP Mode Stack
IPv4 Mode
IPv6 Mode*
Uses both IPv4 and IPv6 to set the IP addre
Uses IPv4 to set the IP a
3
Uses IPv6 to set the IP address.