Table of Contents
Advertisement
When adjustment is complete, the display is:
Printing
job name
< Foil: name of foil
< Vinyl: name of vinyl
Printing continues until:
♦ the job is complete in the RUN SINGLE mode. If more jobs are waiting to be printed,
the RUN CONT and RUN SINGLE lights alternately blink.
♦ all jobs are complete in the RUN CONT mode. The light over the RUN CONT key
remains on to indicate that the printing sequence will start automatically when more
jobs are sent.
♦ a condition requiring operator intervention is encountered such as the printer runs out
of foil or vinyl or the vinyl required is different than the last job printed. In this case,
the printer pauses and displays a prompt message to tell you what to do.
Tip: Refer to the chapter "Understanding Messages" on page 43 for a list of messages, what
each means, and your response to the message.
Viewing foil and material information for the job
Before or after you start printing, you can check the foil and vinyl status by pressing the
function key opposite the
When viewing foil details, the display shows the foils needed in the job, the amount of foil
loaded in the cassette, and the amount of foil that is required for the job. When viewing material
details, the display shows the design width of the job, and the actual width and length of
material required.
To view the foils information for the job
1 From the Main menu press
Job Queue (n)
< 1 Job name
< 2 Job name
< 4 Job name
2 Press the function key next to a job. This display is:
< View Job Details
< Change Queue Position (not displayed for a replay job or when there is only one job in the queue)
< Remove Job From Queue (not displayed for a replay job)
3 Press the function key for < View Job Details. The an example of a typical display is:
Queue #: 2
Job Description
< Process yellow GCP-706 (if you press this function key, you get a list of all the foils in the job)
< Vinyl: White 225 Custom
4 Press the function key for the foil. An example of a typical display is:
Foils needed this job (1 of 4)
Process yellow GCP-706
60 in. loaded, Bay 1
48 in. required
or
< Foil: name of foil
< Vinyl: name of vinyl
< Job Queue
Job Id: 17
line in the display.
. The display is:
35
Advertisement
Table of Contents
