Table of Contents
Advertisement
16
CHAPTER 3
Understanding the MAXX 2 Control Panel
Press the function key adjacent to the action you want to take. When you choose
the job is aborted and the remaining data is cleared from the printer buffer. If you press
the job is restarted.
This Job
Note: If you cancel a job in GQMgr, the substrate will always be advanced. If you cancel a job
using the MAXX keypad, the canceled job will be pulled off the platen only if you choose
This Job and Advance Substrate
Pausing jobs and restarting a job
Printing may be temporarily stopped at any time while a job is printing. To pause a job, press
the RUN key that is lit to enter the paused mode. The printer completes the swipe it is currently
printing, then unloads the cassette. The RUN CONT and RUN SINGLE lights alternately blink.
The display is
Paused by Operator
Job Name
Foil: name of foil
Vinyl: name of vinyl
To restart a job from the paused mode (as indicated by the alternately blinking lights), press
either the RUN CONT or RUN SINGLE key. The job resumes in the mode selected by the key.
Reprinting the last job
When you are in the run single mode, you can reprint (also called replay) the last job you
printed. You can also use this feature to restart a job you aborted. The display message is
. If you press the function key next to the
< R Job waiting to print
reprints. In the run continuous mode, only the last job in a sequence can be replayed.
Queuing jobs at the MAXX 2 control panel
The Main menu item, <
♦ display a list of all jobs currently in the queue (excluding jobs marked for abort)
♦ determine if a job is available for reprinting (called the replay job)
♦ display detailed information about each queued job
♦ re-position jobs in the queue
♦ delete jobs from the queue
Displaying a list of jobs in the View Job Details
When the Job Queue function key is selected, a list of all the jobs in the queue (not marked for
abort) displays. The queue can hold up to 32 jobs and includes the queue position and job
description (or file name if it is a test or calibration job) for each job. Use the UP and DOWN
keys to scroll through the list.
The most recent job that is started (the job does not have to finish printing) is held in MAXX
memory as a replay job. When in run single mode you can examine a job and if required,
reprint the replay job without resending it from GQ Manager. When a replay job is available, it
displays at the top of the Job Queue, but with the letter
.
, allows you to:
Job Queue
symbol, the job automatically
< R
in place of the queue position number.
R
Cancel This Job
Continue
Cancel
Advertisement
Table of Contents
