Using The Service-Adjustment Program; Installing The Program - Epson STYLUS Scan 2000 Service Manual

EPSON Stylus Scan 2500

5.3 Using the Service-Adjustment Program

For the Stylus Scan, instead of an exclusive service-adjustment program, you
need to use the production program when performing certain service
operations.
This program is necessary to eliminate any malfunction or fluctuation between
individual printer mechanisms and printer parts. Therefore, any time you
replace the printer mechanism, printhead, or main board you need to enter the
correct information in the main board using this production program.
Adjustment

5.3.1 Installing the program

1. Insert the floppy disk in the "A" drive and open the "A" drive folder from
My Computer or the Explorer.
2. Click the program icon for the Adjustment program.
NOTE: The program name varies according to model and program
3. Select an installation folder and click OK.
Using the Service-Adjustment Program
version. At the time of the publication, SS 2000 = N90B01W
and SS2500 = P00B01W
Revision A
113