Epson STYLUS Scan 2000 Service Manual page 130

All-in-one printer, scanner, and copier
Hide thumbs Also See for STYLUS Scan 2000:
Table of Contents

Advertisement

EPSON Stylus Scan 2000
Table 6-2. Lubrication Points (continued)
No.
Standard
<Lubrication Point>
The shaft for "GEAR, 16, 40.8"
on "FRAME, LEFT"
5
<Lubricant Type> G-26
<Lubrication Amount>
Approximately 5-mm long
<Lubrication Point>
Bushings for "ROLLER, PF"
Left: Inside the bushing
Right: Inside the bushing (near the
6
pump assembly)
<Lubricant Type> G-26
<Lubrication Amount>
Approximately 3 mm diametrically
<Lubrication Point>
Both Left/Right Bushings for
"ROLLER, EXIT"
7
<Lubricant Type> G-26
<Lubrication Amount>
Evenly apply inside the bushings.
<Lubrication Point>
Contact points between
"HOLDER, PULLEY, DRIVEN" and
"FRAME, UPPER"
8
<Lubricant Type> G-26
<Lubrication Amount>
2-mm long for each point
Maintenance
Remarks
Use a syringe to apply it.
For the right bushing, apply it
from the paper path side, and
wipe off any grease sticking out to
the cap assembly side.
Rotate "ROLLER, PF" after
applying grease to evenly
distribute it in the bushing.
Use a syringe to apply it.
Avoid applying grease around the
paper path.
Use a syringe to apply it.
Verify that the holder slides only
with spring force after applying
grease.
Use a syringe to apply it.
Table 6-2. Lubrication Points (continued)
See
No.
Standard
page
<Lubrication Point>
ASF;
The round hole in the right frame
133
of ASF (to hold the roller shaft)
9
<Lubricant Type> G-26
<Lubrication Amount>
Evenly apply inside the hole.
<Lubrication Point>
ASF;
Contact points between
133
"HOPPER" and "LEVER, HOPPER,
RELEASE"
10
<Lubricant Type> G-26
<Lubrication Amount>
Evenly apply lubrication to the
points.
<Lubrication Point>
The round cutout in the left frame
134
of ASF ("GEAR, 34" is inserted to
the cutout.)
11
<Lubricant Type> G-26
<Lubrication Amount>
Evenly apply inside the hole
134
Lubrication
Revision A
Remarks
Avoid applying grease to
"ROLLER, ASSEMBLY, LD".
Completely wipe off any grease
sticking out to the inner side of
ASF.
Completely wipe off any grease
sticking out to the inner side of
ASF.
130
See
page
134
135
135

Advertisement

Table of Contents
loading

Table of Contents