Using The Service-Adjustment Program; Installing The Program - Epson STYLUS Scan 2500 Service Manual

EPSON Stylus Scan 2500
Forward =
Gap widens
+ side
- side
PG lever
Figure 5-2. Parallelism Adjustment
Printhead nozzle
surface
Figure 5-3. Overlap of Head Surface and Cleaner Blade
Adjustment
Position mark
Backward =
Gap narrows
Side frame
Right parallelism
adjustment
bushing
Overlap =
0.5mm or
more
Cleaner blade

Using the Service-Adjustment Program

5.3 Using the Service-Adjustment Program
For the Stylus Scan, instead of an exclusive service-adjustment program, you
need to use the production program when performing certain service
operations.
This program is necessary to eliminate any malfunction or fluctuation
between individual printer mechanisms and printer parts. Therefore, any time
you replace the printer mechanism, printhead, or main board you need to
enter the correct information in the main board using this production
program.

5.3.1 Installing the program

1. Insert the floppy disk in the "A" drive and open the "A" drive folder
from My Computer or the Explorer.
2. Click the program icon for the Adjustment program.
NOTE: The program name varies according to model and program
version. At the time of the publication, SS 2000 = N90B01W
and SS2500 = P00B01W
3. Select an installation folder and click OK.
Revision A
116