Epson STYLUS Scan 2000 Service Manual page 136

EPSON Stylus Scan 2000
*Never apply more than 0.6cc of the oil.
Figure 6-14. #12 Carriage Assembly Oil Pad
Never apply oil to the CR guide shaft directly. This may
cause fatal damage to the components of the printer.
Avoid applying oil excessively to the oil pad. This may
cause fatal damage to the components of the printer.
Maintenance
Oil pad
Lubricated side
faces out.
Carriage Assembly
(bottom view)
"SHAFT.CR.GUIDE"
6.3.1.1 Scanner Mechanism
This chapter provides information necessary to keep the scanner function in
optimum condition constantly and to prevent troubles.
When the carriage unit needs to be replaced, or the operation sound of the
carriage movement becomes noisy, it is necessary to apply lubrication.
Following tables show the recommended grease type and lubrication points.
Table 6-3. Recommended Grease
Type Name
Grease G-26
Note*) "E" means exclusive product for EPSON. (Not available on the market.)
Table 6-4. Lubrication points
Figure
Transmission Gear Shaft of the CR motor and
6-1
Driven pulley shaft.
6-1 Driven Pulley Shaft
Excessive lubrication may damage the mechanism part or
cause the malfunction of the operation.
Lubrication
Supply
Part No.
Quantity
40g B702600001
Lubrication Points
G-26 (1x3mm)
G-26(1x3mm)
Revision A
Specification
E*
Lubrication
136