Epson STYLUS Scan 2000 Service Manual page 24

EPSON Stylus Scan 2000
COPY BUTTON
Table 1-16. Copy button functions
Button
Operate • Sets Local Copy Mode as the default.
• Stops the current copy job and ejects the paper during
copying.
Stop/Clear
• Ejects paper during paper loading.
Copy • The default setting for copying is B & W and 100%
• Selects Grayscale, Black Text, or Color (Text & Graphics)
• First press = LED shows current status
• Multiple presses (within 5 sec.s) = moves up one setting
each time
Copy Mode
• Example
First time = Black Text LED activated (default)
Second time = Grayscale LED activated
Third time = Color Text & Graph LED activated
Fourth time = Black Text LED activated
• Selects reduce or enlarge
• Default = 100%
• First press = LED shows current status
• Multiple presses (within 5 sec.s) = moves up one setting
each time
• Example
Enlarge/Reduce
First time = Enlarge/Reduce LED only (100%) activated
(default)
Second time = Enlarge/Reduce and 70% LEDs activated
Third time = Enlarge/Reduce and 93% LEDs activated
Fourth time = Enlarge/Reduce and 141% LEDs activated
Fifth time = Enlarge/Reduce LED only (100%) activated
Product Description
Function
Control Panel
Table 1-17. Power-on functions for the Copy button
Button
Prints a status sheet including firmware version and paper
Copy
size.
Stop/Clear Changes printout paper size during copying (see below).
To change the printout paper size during copying, press the Stop/Clear button
until the appropriate indicator combination activates, as described below.
Table 1-18. Changing printout paper sizes during local copying
Control Panel Indicators
Paper size
Scanner Error Color
A4 on
Letter on
Revision A
Function
Grayscale Black Text
on off off
off off on
24