Epson Stylus Scan 2000 Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. All in One Printer
  5. Stylus Scan 2000
  6. Manual
Epson Stylus Scan 2000 Manual

Epson Stylus Scan 2000 Manual

Hide thumbs Also See for Stylus Scan 2000:
Table of Contents

Advertisement

Quick Links

Download this manual
All in One Product
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of SEIKO EPSON
CORPORATION. The information contained herein is designed only for use with this EPSON
printer. EPSON is not responsible for any use of this information as applied to other printers.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred by the purchaser
or third parties as a result of: accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly
comply with SEIKO EPSON CORPORATION's operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from
the use of any options or any consumable products other than those designated as Original
EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from
electromagnetic interference that occurs from the use of any interface cables other than
EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark and EPSON ESC/P and EPSON Stylus are trademarks of
SEIKO EPSON CORPORATION.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2000 by SEIKO EPSON CORPORATION, Nagano, Japan.
9

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus Scan 2000

Summary of Contents for Epson Stylus Scan 2000

  • Page 1 CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of...

  • Page 2: Where To Find Information

    Where to Find Information Setup Guide ❏ Read this first to set up and begin using your EPSON Stylus Scan. This guide also includes information on installing the EPSON Stylus Scan software. Daily Use guide ❏ Refer to this for information on daily operation. This guide also contains troubleshooting tips and information on contacting customer support.

  • Page 3: Table Of Contents

    Loading the Paper ........55 Using the EPSON SMART PANEL Copy Utility ..56 Using Stylus Scan’s Control Panel .
  • Page 4 Using Status Monitor 3 ......73 Maintenance ....... . Maintenance .

  • Page 5: Safety Instructions

    Model: C120A Conforms to the following Directive(s) and Norm(s): Directive 89/336/EEC: EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 50082-1 IEC 801-2 IEC 801-3 IEC 801-4 Directive 73/23/EEC: EN 60950 June 1999 H. Horiuchi President of EPSON EUROPE B.V.

  • Page 6: Important Safety Instructions

    Important Safety Instructions Read all of these instructions before using your EPSON Stylus Scan. Also be sure to follow all warnings and instructions marked on the Stylus Scan. ❏ Unplug the Stylus Scan before cleaning. Clean with a damp cloth only. Do not spill liquid on the Stylus Scan.

  • Page 7: A Few Precautions

    ❏ Do not attempt to service the EPSON Stylus Scan yourself. ❏ Unplug the Stylus Scan and refer servicing to qualified service personnel under the following conditions: The power cord or plug is damaged; liquid has entered the Stylus Scan; the Stylus Scan has been dropped or the cabinet damaged;...
  • Page 8 When choosing a place for the Stylus Scan ❏ Place the EPSON Stylus Scan on a flat, stable surface that extends beyond the Stylus Scan base in all directions. The Stylus Scan will not operate properly if it is tilted or at an angle.

  • Page 9: Energy Star Compliance

    Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement. NERGY TAR Compliance As an NERGY TAR Partner, EPSON has determined that this product meets the NERGY TAR guidelines for energy efficiency. The International NERGY TAR Office Equipment Program is...

  • Page 10: Epson Stylus Scan Parts And Functions

    EPSON Stylus Scan Parts and Functions Stylus Scan Parts and Control Panel Functions document support paper support paper feeder paper edge guide top cover document edge guides front cover document feeder output tray output tray extension...
  • Page 11 color ink cartridge ink cartridge clamps replacement position black ink cartridge replacement position control panel adjust lever...

  • Page 12: Control Panel

    Control Panel The control panel consists of buttons and indicator lights, and gives you access to several features. Match the icons on the control panel with those in the chart below. selector lights reduce/enlarge light copy mode button reduce/enlarge button Buttons Button Function...
  • Page 13 Loads paper into or ejects paper from the paper feeder if pressed and released quickly. If the print load/eject head is in the ink cartridge change position, it returns to the home position. Moves the print head to the ink cartridge change position if pressed and held for three seconds.
  • Page 14 Lights Light Description On when the Stylus Scan is on and ready to print, copy, or scan. power Flashing when the Stylus Scan is receiving data, printing, scanning, copying, warming up, or in ink cartridge replacement mode. On when the Stylus Scan is out of paper for printing or copying.
  • Page 15 selector lights When the reduce/enlarge light is off, these lights indicate the current copy setting. Top: On when Color is the copy setting. Middle: On when Grayscale is the copy setting. Bottom: On when B/W is the copy setting. When the reduce/enlarge light is on, these lights indicate the current magnification setting.

  • Page 16: Printing Your Page

    EPSON distributes special media that are formulated for the ink used in EPSON ink jet devices. It is recommended that you use these media to ensure high-quality results. See “EPSON special media” for a complete list of these products.
  • Page 17 ❏ Make sure the printable side of the paper is facing up when loading media into the paper feeder. See the instruction sheets packed with the media to determine which side is the printable surface. Some media have cut corners to help identify the correct loading direction, as shown in the illustration.
  • Page 18 ❏ The loading capacity for EPSON special media is explained below. 360 dpi Ink Jet Paper and Up to the arrow mark on the left edge Photo Quality Ink Jet Paper guide. Photo Quality Ink Jet Cards, Up to 30 index cards. Always place the Ink Jet Note Cards, and Ink included support sheet* under the cards.
  • Page 19 ❏ If the paper is curled, make sure to flatten it or curl it slightly toward the opposite side before loading. Printing on curled paper may smear your printout, especially when printing with Maximum selected as the Printable Area setting. ❏...

  • Page 20: Loading Envelopes

    About special media cleaning sheets Cleaning sheets packaged with EPSON special media should not be used with the Stylus Scan. The cleaning function performed by these sheets is not needed, and the sheets could jam in the Stylus Scan. Loading Envelopes When printing on envelopes, please note the following: ❏...
  • Page 21 ❏ Load envelopes flap edge first with the flap side down, as shown below. Available envelopes sizes are: No.10, DL, C6 ❏ Do not use envelopes that are curled or folded. Make sure to flatten the envelope flaps before loading. Also avoid using envelopes that are too thin;...

  • Page 22: Introduction To Printer Software For Windows

    Introduction to Printer Software for Windows The printer driver controls the Stylus Scan's print functions. This software lets you choose from a wide variety of settings to get the best results when printing. It also includes utilities that help you to check your Stylus Scan and to perform maintenance tasks.

  • Page 23: Making Changes To Printer Driver Settings For Windows

    Follow the directions below to access your printer software from the Windows Start menu. 1. Click Start, point to Settings, then click Printers. 2. Select EPSON Stylus Scan 2000, then click Properties on the File menu. The printer driver opens. Making Changes to Printer Driver Settings for Windows The printer driver provides the following menus and settings.
  • Page 24 PhotoEnhance This mode lets you choose from a variety of image-correction settings specially designed for photos. See “Using the Photo Enhance mode” on page 22. Custom This mode lets you choose from a list of ready-made or personalized settings suited to the kind of document you want to print.
  • Page 25 S041122 EPSON Photo Quality Self Adhesive Sheets (A4) S041106 EPSON Ink Jet Note Cards A6 (with envelopes) S041147 EPSON Ink Jet Greeting Cards 5 × 8” (with envelopes) S041148 EPSON Ink Jet Greeting Cards 8 × 10” (with envelopes) S041149...
  • Page 26 S041134 EPSON Photo Paper (100 × 150 mm) S041255 EPSON Photo Paper (200 × 300 mm) S041254 EPSON Panoramic Photo Paper (210 × 594 mm) S041145 EPSON Photo Paper Cards (A4) S041177 Photo Quality Glossy Film EPSON Photo Quality Glossy Film (A4)
  • Page 27 Using the Automatic setting When Automatic is selected as the Mode setting on the Main menu, the printer driver takes care of all of the detailed settings based on the current Media Type and Ink settings. To make the Ink setting, click Color to print in color, or Black to print in black- and-white or grayscale.
  • Page 28 Using the Photo Enhance mode The PhotoEnhance mode provides a variety of image-correction settings that you can apply to your photo images before printing. PhotoEnhance does not affect your original data. Note: ❏ This mode is only available when you are printing in color. ❏...
  • Page 29 You can select from the following ready-made settings. Text/Graph This setting is good for printing presentation documents such as graphs and charts. This setting is best for printing drafts of text Economy This setting automatically adjusts printout colors to match colors on your screen. ICM stands for Image Color Matching.

  • Page 30: Previewing Your Printout

    Previewing your printout To see a preview of your document before printing it, select the Print Preview check box on the Main menu. When you print your document, the Print Preview window appears: The Preview dialog box contains several icon buttons you can use to perform the following functions.
  • Page 31 Printable Selecting this option will display a area on/off rectangle on the page being previewed. This rectangle is the printable area for the page. The Stylus Scan cannot print anything which exceeds this rectangle. Watermark This option displays the watermark settings dialog.

  • Page 32: Getting Information Through Online Help For Windows

    Cancel to cancel printing. Getting Information Through Online Help for Windows The EPSON Stylus Scan offers extensive online help. You can access help either from the application you are working in, or directly from the operating system.
  • Page 33 Accessing help from the Start menu Click the Start button, point to Programs and Epson Stylus Scan, and then click EPSON Stylus Scan 2000 Printer Help. The Help Contents window opens.

  • Page 34: Printing Your Page For Macintosh

    Printing Your Page for Macintosh Printer Software Introduction The printer software which comes with your Stylus Scan includes a printer driver and printer utilities. The printer driver lets you choose from a wide variety of settings to get the best results from your Stylus Scan.
  • Page 35 Note: Driver settings are not saved from one application to the next. Whenever you exit one application and open a new one, check that the printer settings are still appropriate. For example, if you specify a Media Type in one application, when you exit that application and open a new one you will have to specify that Media Type again.
  • Page 36 Making the Media Type setting The Media Type setting determines what other settings are available, so you should always make this setting first. In the Print dialog box, select the Media Type setting that matches the paper you loaded in the Stylus Scan. To find out what media type you are using, find your media in the list below, and refer to the corresponding media type under which it is grouped (shown inbold).
  • Page 37 S041122 EPSON Photo Quality Self Adhesive Sheets (A4) S041106 EPSON Ink Jet Note Cards A6 (with envelopes) S041147 EPSON Ink Jet Greeting Cards 5 x 8” (with envelopes) S041148 EPSON Ink Jet Greeting Cards 8 x 10” (with envelopes) S041149...
  • Page 38 S041134 EPSON Photo Paper (100 × 150 mm) S041255 EPSON Photo Paper (200 × 300 mm) S041254 EPSON Panoramic Photo Paper (210 × 594 mm) S041145 EPSON Photo Paper Cards (A4) S041177 Photo Quality Glossy Film EPSON Photo Quality Glossy Film (A4)
  • Page 39 Using the Automatic mode When Automatic is selected as the Mode setting in the Print dialog box, the printer driver takes care of all detailed settings based on the current Media Type and Ink settings. To make the Ink setting, click Color to print in color, or Black to print in black-and-white or grayscale.
  • Page 40 ❏ Printing with PhotoEnhance selected may increase the time required for printing, depending on your computer system and the amount of data contained in your image. You can select from the following settings. Standard This setting provides standard image correction for most photos.

  • Page 41: Previewing Your Printout

    1. Verify the Media Type and Ink settings in the Print dialog box. For details, see “Making the Media Type setting” on page 50. 2. Select the Custom radio button in the Print dialog box. This enables the Custom Settings list, located to the right of the Custom radio button.
  • Page 42 3. Click the Preview button. The Preview dialog box appears and displays a preview of your document. The Preview dialog box contains six icon buttons you can use to perform the following functions. Selection This feature lets you select, move, and resize watermarks.

  • Page 43: Saving Print Data In Files

    4. If you are satisfied with the previewed image, click Print. If you are not satisfied with the appearance of the image, click Cancel. The Preview and Print dialog boxes close and the current print settings are saved. Open the Print dialog box again to make additional changes to the print settings.
  • Page 44 When you want to print the document, double-click the file to open EPSON Monitor3. Click the Resume button to send the data to the Stylus Scan.

  • Page 45: Scanning

    Scanning Loading the Document Follow the directions in this section to load documents into the document feeder of your Stylus Scan. If you are scanning fragile or thin media, see “Loading thin or fragile media” on page 81. Loading normal media Follow the steps below to load a document into the document feeder.
  • Page 46 Note: ❏ Be sure to place the top edge of the document into the document feeder first. If the document is too wide to fit into the feeder in this manner, try loading the document sideways. After scanning, you can rotate the image 90 degrees using the scanning software.
  • Page 47 1. To use the protection sheet, peel back the top layer of film by pulling up the tab. 2. Place your document inside the film layers. Note: Align the top edge of the document with the closed top edge of the protection sheet to make sure that the document is straight.

  • Page 48: Scanning Basics

    You can digitize your photos and documents quickly and easily using EPSON SMART PANEL. When you install the EPSON Stylus Scan drivers, EPSON SMART PANEL is installed as well. To run the program, first restart your computer. In Windows, click the SMART PANEL icon in your task bar. With Macintosh computers, select EPSON SMART PANEL from the Apple Menu.
  • Page 49 Document Scan Assistant, helps you scan documents for processing by optical character recognition (OCR) software. Each EPSON SMART PANEL application is briefly described in this section. For details, refer to your EPSON SMART PANEL documentation. Photo Print (Windows) / PrintFun (Macintosh) Photo! Print and PrintFun allow you to print images in various sizes, placing one or several on a page.
  • Page 50 Fax lets you send and receive faxes with your computer. This utility also helps you store and manage all your fax documents quickly and easily. Note: You must install WinFax (Windows) or FAXstf (Macintosh) to use this application.
  • Page 51 Copy Copy turns your EPSON Stylus Scan into a digital copy machine. Its user interface looks like a real copy machine, yet its functions are more powerful and flexible than any copy machine available. The OCR utility scans text and saves it as a text file, or sends it...
  • Page 52 E-mail E-mail will scan an image directly into an e-mail message. Scan to Application Scan to Application will scan an image and send the image data to a specified application for further editing.
  • Page 53 Scan for Creativity Scan for Creativity scans the image and sends the image data to Photo Deluxe. This application is only available if Photo Deluxe is installed.

  • Page 54: Copier

    5. The document feeder will draw the document into the Stylus Scan a short distance. Release the document. You are now ready to make a copy, using either the control panel on your EPSON Stylus Scan or the Copy utility included in EPSON SMART PANEL. Note: ❏...

  • Page 55: Using The Epson Smart Panel Copy Utility

    Using the EPSON SMART PANEL Copy Utility Copy is application included with EPSON SMART PANEL. You must install the EPSON Stylus Scan Software and EPSON SMART PANEL before you can use it. Refer to the Setup Guide for details on installation.
  • Page 56 Making copy settings in the Copy utility You can make copy settings in the Copy utility dialog box. Document Type setting Media Type setting help button Reduce/Enlarge Quality button stop/clear button buttons More settings button copy button close button Refer to the table below for settings information. Click the More settings button if you wish to make advanced and custom settings.
  • Page 57 Making paper and document settings The paper and document settings are located at the top of the Copy utility dialog box. Media Type Select the type of paper that matches the paper which is loaded into the paper feeder. Paper Size Select the paper size that matches the paper which is loaded into the paper feeder.
  • Page 58 Making other basic settings displays current settings scaling Reduce/Enlarge scaling setting custom setting Reduce/Enlarge Make one of the following settings to adjust the size of the copy: ❏ Select 100% to make a copy that is the same size as your document.

  • Page 59: Using Stylus Scan's Control Panel

    Using Stylus Scan’s Control Panel Follow the instructions in this section to copy documents directly using the control panel on EPSON Stylus Scan. When working from the control panel, begin by selecting the reduce/enlarge ratio and the copy mode.
  • Page 60 You can choose from the following settings: 100%, 70%, 93%, or 141%. reduce/enlarge light reduce/enlarge button Making the copy mode setting Press the copy mode button as many times as necessary to select the mode you want. The setting changes each time you press the button;...
  • Page 61 The document is drawn into the document feeder, then reverses direction and passes back out the document feeder slot. At the same time, the EPSON Stylus Scan feeds a blank sheet of paper from the paper feeder, prints the image onto the paper, and ejects the paper onto the output tray.

  • Page 62: Replacing Ink Cartridges

    Replacing Ink Cartridges Using the control panel The Stylus Scan’s indicator lights will inform you when it is time to obtain a replacement ink cartridge and when it is time to replace an empty cartridge. You can also check ink levels and start the ink cartridge replacement procedure from your computer using the Status Monitor utility.
  • Page 63 1. Make sure the Stylus Scan is on. The P power light should be on, but not flashing. 2. Lower the output tray at the front of the EPSON Stylus Scan, then open the front cover.
  • Page 64 3. Hold down the cleaning button for three seconds, then release it. The print head moves to the replacement position for the color ink cartridge and the P power light begins flashing. Caution: Do not move the print head by hand, as this may damage the mechanism.
  • Page 65 Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Caution: Once you open the ink cartridge clamp, the ink cartridge becomes unusable and cannot be reinstalled, even if ink remains.
  • Page 66 6. Place the ink cartridge gently into the cartridge holder with the label on the cartridge facing up. Then lower the ink cartridge clamp and press down until it locks in place. Do not press down on the cartridge itself. Caution: Once you install the ink cartridges, do not open their clamps again until you replace the cartridges.
  • Page 67 1. Make sure the Stylus Scan is on. The P power light should be on, but not flashing. 2. Lower the output tray at the front of the EPSON Stylus Scan, then open the front cover. 3. Hold down the cleaning button for three seconds, then release it.
  • Page 68 Caution: Do not move the print head by hand, as this may damage the mechanism. 4. Push back the release tabs and lift up the clamp that holds the cartridge you want to replace as far as it will go. The cartridge rises partly out of the cartridge holder.Then lift the cartridge out of the Stylus Scan and dispose of it properly.
  • Page 69 5. Remove your new black ink cartridge from its protective bag. Then remove the yellow tape seal from the cartridge. black ink cartridge (S020189) Caution: ❏ You must remove the yellow tape seal from the cartridge before installing it. The cartridge will be permanently damaged if installed with the yellow tape attached.
  • Page 70 6. Place the ink cartridge gently into the cartridge holder with the label on the cartridge facing up. Then lower the ink cartridge clamp and press down until it locks in place. Do not press down on the cartridge itself. Caution: Once you install the ink cartridges, do not open their clamps again until you replace the cartridges.
  • Page 71 7. Make sure the B black and A color lights are off, then press cleaning button and release quickly. The Stylus Scan moves the print head and begins charging the ink delivery system. This process takes about one minute to complete. When the ink charging process is finished, the Stylus Scan returns the print head to its home position and the P power light stops flashing...

  • Page 72: Using Status Monitor 3

    Using Status Monitor 3 You can monitor the remaining ink level from your computer and view on-screen instructions for replacing a low or empty ink cartridge. When an ink cartridge is low or empty and you are ready to replace it, click the How To button in the Status Monitor’s Printer Status window.

  • Page 73: Maintenance

    1. Make sure that A4 or Letter size paper is loaded in the paper feeder. 2. If the EPSON Stylus Scan is on, press the P power button once to turn it off. load/eject button and press the P power 3.
  • Page 74 The Stylus Scan prints an operation check page including its ROM version information, the ink counter code, and a nozzle check pattern. Below are sample printouts. Good sample Print head needs to be cleaned segments are missing The above sample is in black and white, but the actual test prints in color (CMYK).

  • Page 75: Cleaning The Print Head

    Cleaning the Print Head If you find that printouts and copies are unexpectedly faint or that there are gaps (missing dots) in the printed image, you may be able to solve the problem by cleaning the print head. Cleaning the print head ensures that the nozzles are delivering the ink properly.
  • Page 76 2. Hold down the cleaning button for three seconds, then release it. The EPSON Stylus Scan starts cleaning the print head and the P power light begins flashing. Print head cleaning takes about one minute to complete. Caution: Never turn off the Stylus Scan while the P power light is flashing.

  • Page 77: Aligning The Print Head

    If print quality remains a problem after replacing the ink cartridges, contact your dealer. Note: To maintain print quality, EPSON recommends turning on the Stylus Scan for at least one minute every month. Aligning the Print Head If you notice a misalignment of vertical lines, you may be able to solve this problem from your computer using the Print Head Alignment utility.

  • Page 78: Calibrating Your Screen

    Follow the steps below to calibrate your screen. For Windows Users 1. Double-click the EPSON Stylus Scan SF icon in the Control Panel. The EPSON Stylus Scan SF dialog box appears.
  • Page 79 2. Click the Screen Calibration Utility button. The Screen Calibration dialog box appears. 3. Adjust the slider until the shades of the gray horizontal stripes match. 4. Click OK to finish calibrating your scanner and monitor. The gray stripes will not blend perfectly; however, try to make the different tones match as closely as possible.
  • Page 80 For Macintosh Users 1. Click the EPSON Screen Calibration icon in the EPSON Scanner folder. The following dialog box appears. 2. Adjust the slider until the shades of the gray horizontal stripes match. 3. Click OK to finish calibrating your scanner and monitor.

  • Page 81: Troubleshooting

    Troubleshooting...

  • Page 82: Error Indicators

    Error Indicators You can identify many common problems by using the lights on the Stylus Scan’s control panel. If the EPSON Stylus Scan stops working and the lights are on or flashing, use the following table of panel light patterns to diagnose the problem, then follow the recommended corrective measures.

  • Page 83: Typical Problems And Solutions

    Ink out (black ink cartridge) The black ink cartridge Replace the black ink is empty. cartridge with a new one. See “Replacing a black ink cartridge” on page 120. Ink low (color ink cartridge) The color ink cartridge Obtain a replacement color is nearly empty.

  • Page 84: Print Quality Problems

    Print quality problems If you are having print quality problems, try the solutions offered here. Horizontal banding Try one or more of these solutions: ❏ Make sure the printable side of the paper is face up in the paper feeder. ❏...
  • Page 85 Blurry or smeared printout Try one or more of these solutions: ❏ Make sure the printable side of the paper is face up in the paper feeder. ❏ Make sure your paper is not damaged, dirty, or too old. ❏ Set the adjust lever to the “+” position, and make sure the Media Type setting in your printer driver is correct.

  • Page 86: Where To Get Help

    Customer support will be able to help you much more quickly if you give them the following information. ❏ Serial number of your EPSON Stylus Scan (The serial number label is on the back of the EPSON Stylus Scan.)
  • Page 87 To use Faxon EPSON, call 01442 227332 in the UK or 0044 1442 227332 from the Republic of Ireland using a touch-tone phone. You will be asked to follow a simple routine to register your document request.
  • Page 88 The documents will be faxed to you automatically. Bulletin Board Service for latest drivers and utilities You can call the EPSON Bulletin Board Service on 01442 227479 in the UK or 0044 1442 227479 from the Republic of Ireland. No membership is required.
  • Page 89 ❏ Where to purchase genuine EPSON consumables, accessories, and options For Australian Users EPSON Australia wishes to provide you with a high level of Customer Service. As well as the user’s guide, we provide the following sources for obtaining information:...
  • Page 90 EPSON Helpdesk EPSON Helpdesk is provided as a final backup to make sure our clients have access to advice. Operators on the Helpdesk can aid you in diagnosing hardware and software problems. They can also advise you on the latest EPSON products and where the nearest dealer or service agent is located.

  • Page 91: Product Information

    To obtain technical support as well as other after-sales services, users are welcome to contact EPSON Hong Kong Limited. Internet home page EPSON Hong Kong has established a local home page in both Chinese and English on the Internet to provide users with the following information: ❏...
  • Page 92 (852) 2585-4399 Fax: (852) 2827-4383 For Philippines Users To obtain technical support as well as other after sales services, users are welcome to contact the EPSON Philippines Representative Office at the telephone and fax numbers below: Phone: (632) 813-6552 Fax:...

  • Page 93: Options And Consumable Products

    The following interface cables and interface cards are available for your EPSON Stylus Scan. Interface cables EPSON supplies several types of interface cables. You can use any interface cable that meets the following specifications. See your computer manual for any additional requirements.

  • Page 94: Ink Cartridges

    Color ink cartridge S020191 Note: The product numbers of ink cartridges vary by location. EPSON special media EPSON offers specifically designed media for ink jet printers to meet most high-quality printing needs. EPSON 360 dpi Ink Jet Paper (A4) S041059 S041025...
  • Page 95 EPSON Photo Paper Cards (A4) S041177 EPSON Photo Stickers 16 (A6) S041144 EPSON Photo Stickers 4 (A6) S041176 EPSON Panoramic Photo Paper (210 × 594 mm) S041145 EPSON Iron-On Cool Peel Transfer Paper (A4) S041154 EPSON Iron-On Cool Peel Transfer Paper (Letter) S041153...

Table of Contents