Circuit Board Removal; Power Supply Board Removal - Epson Stylus Pro 9000 - Print Engine Service Manual
Wide-format professional inkjet printer
Hide thumbs
Also See for Stylus Pro 9000 - Print Engine:
- Service manual (186 pages) ,
- User manual (176 pages) ,
- Printer manual (143 pages)
Table of Contents
Advertisement
EPSON Stylus Pro 9000
4.3 Circuit Board Removal
Follow the steps below to remove the power supply board (C277PSU) and the
main board (C277MAIN).
POWER SUPPLY BOARD REMOVAL
Preparation:
Remove the Maintenance Cover as described in
Removal
on page 58.
Remove the Top Cover as described in
Remove the Upper Paper Guide as described in
Removal
on page 64.
1. Remove the two cables connected to the Power Supply Board as shown.
2. Remove the five screws that secure the Power Supply Board, and then
remove the board.
Disassembly & Assembly
Maintenance Cover
Top Cover Removal
on page 59.
Upper Paper Guide
CBF M3x6 screw
Figure 4-15. Power Supply Board Removal
(viewed from in back of printer)
65
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
