Pc Printing Issues; Pc Printing Via Usb Connection; Firmware Update - Ricoh Aficio SP 1100SF User Manual

During reception: ask your subscriber to resend the
document.

PC printing issues

This section details how the machine handles a print
request after having encountered an issue (paper jam,
connection loss, etc.).
Refer to the sections below to know if the printing of your
document will resume or will be cancelled, depending on
the problem encountered during printing.

PC printing via USB connection

Issue encountered
Paper empty
No paper feed
Paper jam
Paper format problem
Toner empty
Pause requested
from the spooler
Loss of USB
connection
Print request handling
Once the problem is resolved,
printing resumes from the first
non-printed page.
Once the problem is resolved,
printing resumes from the first
non-printed page.
Exception: If the document
was to be printed in manual
duplex mode, the printing of
the document is cancelled.
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will print
after the toner cartridge is
replaced.
The machine switches to idle
mode after a timeout (30
seconds by default).
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will be
printed.
Once the problem is resolved,
the printing of the document
restarts from the beginning,
regardless of the number of
pages already printed before
the connection loss.
SP1100SF/Aficio SP1100SF

Firmware update

Updating the machine firmware requires that the
Companion Suite Pro software be installed on your PC,
and that the PC is connected to the machine (see PC
Features, page 41).
Contact your Dealer to check if firmware updates are
available for your machine.
Then, access the update utility (S
> C S
OMPANION UITE
> C - F
OMPANION IRMWARE
downloaded file and launch the update.
- 65 -
> A P
TART LL ROGRAMS
> C S P
OMPANION UITE
U ), select
PDATE
LL2
RO
the