Maintenance; Service; General Information; Toner Cartridge Replacement - Ricoh Aficio SP 1100SF User Manual

Table of Contents

Advertisement

SP1100SF/Aficio SP1100SF

Maintenance

Service

General information

For your safety, it is imperative to
refer to the safety information
CAUTION
presented in chapter Security,
page 1.
To ensure that your machine is kept in the best
conditions, it is recommended that you periodically clean
the inner parts.
Please respect the following rules while using this
machine:
- Do not leave the scanner cover open.
- Do not try to lubricate the device.
- Do not close the scanner cover violently or do not
apply vibrations to the machine.
- Do not open the cartridge access cover while printing.
- Do not try to disassemble the machine.
- Do not use paper which would has stayed in the tray
for too long.

Toner cartridge replacement

Three toner cartridge replacement procedures can be
used depending on the T
T
M
setting set to W
ONER
ANAGEMENT
replacement of the cartridge can be perfomed only
when the message Toner near end is displayed. At
the end of replacement, validation with the smart card
is required.
T
M
setting set to W
ONER
ANAGEMENT
the replacement of the cartridge can be perfomed at
any time. At the end of replacement, validation with the
smart card is required.
T
M
setting set to W
ONER
ANAGEMENT
replacement of the cartridge can be perfomed at any
time and no validation with the smart card is
necessary. When set to W
T
? %.
ONER
To set the T
M
ONER
ANAGEMENT
SETUP / TECHNICALS / TONER MANAGEMENT and
choose the setting.
This procedure applies when the
setting T
W
ITH
CAUTION
When set to With [0-100%], follow the
procedure from step 2.
When set to W
procedure from step 2 to step 7.
M
setting.
ONER
ANAGEMENT
[0-10%] : the
ITH
[0-100%] :
ITH
: the
ITHOUT
, the screen displays
ITHOUT
setting, select 6 2979 -
M
is set to
ONER
ANAGEMENT
[0-10%].
, follow the
ITHOUT
Your machine comes with a current consumable
management system. It tells you if your toner cartridge is
close to its end of cycle. The following message will
appear on your machine screen.
TONER NEAR
END
To quit this screen, press OK.
To replace the toner cartridge, proceed as shown below.
When the following message is displayed on the screen:
TONER EMPTY
REPLACE <OK>
1 Press OK.
OPEN FRONT COVER
REPLACE TONER
2 Stand in front of the device.
3 Push on the left and right sides of the cover and pull
it towards you.
4 Raise and remove the toner cartridge from the
machine.
5 Unpack the new cartridge and insert it into the slot
as indicated in the diagram below.
6 Close the cover.
The following message appears:
HAVE YOU CHANGED
THE TONER? <OK>
7 Press OK.
- 60 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents