Connections - Ricoh Aficio SP 1100SF User Manual

5 Select L P LL2 in the list and click on N
ASER RO
6 A screen informs you that the drivers have been
installed. Click on the C
You can now use the multifunction machine to print or
scan your documents.

Connections

Make sure that your multifunction machine is powered off.
The connection between the PC and the machine
requires a USB 2.0 shielded cable no more than 3 meters
long.
It is recommended to install the
Companion Suite Pro software first
and then to connect the USB cable
to your machine (See section
"Installing the full software
package", page 41.).
If you connect the USB cable
before installing the Companion
Suite Pro software the recognition
Important
system (plug and play) identifies
automatically that new hardware
has been added. To start your
machine drivers installation, refer to
chapter Installing the drivers
manually and follow the
instructions on screen. When you
use this procedure, only printing
and scanning functions are
activated.
EXT
button.
LOSE
SP1100SF/Aficio SP1100SF
. 1 Locate your USB cable connectors and connect as
shown below on the picture.
2 Power on your multifunction machine.
The PC detects the device and the drivers are
automatically installed.
3 Once the installation is finished, a message
indicates that the drivers are installed correctly.
You can now use the multifunction machine to print or
scan your documents.
- 45 -