Disabling Vtp Version 2; Enabling Vtp Pruning - Cisco WS-C6506 Software Manual

Configuring VTP Version 1 and Version 2
Version
Domain Name
Notifications: disabled
Feature
-------------- -------------- -----------
VLAN
Pruning
VLANs prune eligible: 2-1000
Console> (enable)

Disabling VTP Version 2

To disable VTP version 2, perform this task in privileged mode:
Task
Step 1
Disable VTP version 2.
Step 2
Verify that VTP version 2 is disabled.
This example shows how to disable VTP version 2:
Console> (enable) set vtp version 1
This command will enable VTP version 1 function in the entire management domain.
Warning: trbrf & trcrf vlans will not work properly in this version.
Do you want to continue (y/n) [n]? y
VTP domain Lab_Network modified
Console> (enable) show vtp domain
Version
Domain Name
Notifications: disabled
Feature
-------------- -------------- -----------
VLAN
Pruning
VLANs prune eligible: 2-1000
Console> (enable)

Enabling VTP Pruning

To enable VTP pruning, perform this task in privileged mode:
Task
Step 1
Enable VTP pruning in the management domain. set vtp pruning enable
Step 2
(Optional) Make specific VLANs pruning
ineligible on the device. (By default,
VLANs 2–1000 are pruning eligible.)
Step 3 (Optional) Make specific VLANs pruning eligible
on the device.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
10-10
: running VTP2 (VTP3 capable)
: Lab_Network
Mode Revision
Off 0
: disabled
: running VTP1 (VTP3 capable)
: Lab_Network
Mode Revision
Off 0
: disabled
Password : configured (hidden)
Updater ID: 172.20.52.19
Command
set vtp version 1
show vtp domain
Password : configured (hidden)
Updater ID: 172.20.52.19
Command
clear vtp pruneeligible vlan_range
set vtp pruneeligible vlan_range
Chapter 10 Configuring VTP
OL-8978-04