Enabling Rscn Timer Configuration Distribution; Locking The Fabric - Cisco Nexus 6000 Series Configuration Manual

Managing FLOGI, Name Server, FDMI, and RSCN Databases
All configuration commands are not distributed. Only the rscn event-tov tov vsan vsan command is
Note
distributed.
Only the RSCN timer configuration is distributed.
Caution
The RSCN timer is registered with CFS during initialization and switchover. For high availability, if the
RSCN timer distribution crashes and restarts or a switchover occurs, it resumes normal functionality from the
state prior to the crash or switchover.
For additional information, refer to Using Cisco Fabric Services in the System Management Configuration
Guide for your device.

Enabling RSCN Timer Configuration Distribution

You can enable RSCN timer configuration distribution.
Procedure
Step 1
Step 2
Step 3

Locking the Fabric

The first action that modifies the database creates the pending database and locks the feature in the VSAN.
Once you lock the fabric, the following situations apply:
• No other user can make any configuration changes to this feature.
• A copy of the configuration database becomes the pending database along with the first active change.
OL-27932-01
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
rscn distribute
Example:
switch(config)# rscn distribute
no rscn distribute
Example:
switch(config)# no rscn distribute
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
Purpose
Enters global configuration mode.
Enables RSCN timer distribution.
Disables (default) RSCN timer
distribution.
RSCN
127