Enabling Cfs To Distribute Fc Port Security Configurations; Enabling Cfs To Distribute Fc Timer Configurations - Cisco Nexus 7000 Series Configuration Manual

Enabling CFS Distribution for Applications

Enabling CFS to Distribute FC Port Security Configurations

You can enable CFS to distribute Fibre Channel (FC) port security configurations in order to provide a single
point of configuration for the entire fabric in the VSAN and to enforce the port security policies throughout
the fabric.
Before You Begin
Make sure that you are in the storage VDC. To change to the storage VDC, use the switchto vdc fcoe command.
Make sure that you enable the FC port security feature. To do so, use the feature fc-port-security command.
Procedure
Step 1
Step 2
Step 3
Step 4
This example shows how to enable CFS to distribute FC port security configurations:
switch(config)# fc-port-security distribute
switch(config)# show cfs application
----------------------------------------------
Application Enabled Scope
----------------------------------------------
fc-port-securi Yes Logical
switch(config)# copy running-config startup-config
[########################################] 100%

Enabling CFS to Distribute FC Timer Configurations

You can enable CFS to distribute Fibre Channel (FC) timer configurations for all Cisco NX-OS devices in
the fabric.
Before You Begin
Make sure that you are in the storage VDC. To change to the storage VDC, use the switchto vdc fcoe command.
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
28
Command or Action
switch# configure terminal
switch(config)# fc-port-security
distribute
switch(config)# show cfs application
switch(config)# copy running-config
startup config
Purpose
Enters global configuration mode.
Enables CFS to distribute FC port security
configuration updates.
(Optional)
Displays the CFS distribution status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Configuring CFS