Debug Platform Port-Asic - Cisco WS-C3560E-24PD-E Command Reference Manual

debug platform port-asic

debug platform port-asic
Use the debug platform port-asic privileged EXEC command to enable debugging of the port
application-specific integrated circuit (ASIC) driver. Use the no form of this command to disable
debugging.
Syntax Description
interrupt
periodic
read
write
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug platform port-asic command is the same as the no debug platform port-asic command.
Related Commands Command
show debugging
Catalyst 3560 Switch Command Reference
B-56
debug platform port-asic {interrupt | periodic | read | write}
no debug platform port-asic {interrupt | periodic | read | write}
Display port-ASIC interrupt-related function debug messages.
Display port-ASIC periodic-function-call debug messages.
Display port-ASIC read debug messages.
Display port-ASIC write debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Appendix B Catalyst 3560 Switch Debug Commands
78-16405-05