Viewing Available Wireless Station Statistics - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Table 3-2. Statistics Fields
Field
Multicast Packets
Total Packets
Total Bytes
Wireless 11n/na
Unicast Packets
Broadcast Packets
Multicast Packets
Total Packets
Total Bytes

Viewing Available Wireless Station Statistics

The Available Wireless Stations List (AWSL) contains a table of all IP devices associated with this
wireless access point in the wireless network defined by the Wireless Network Name (SSID). For
each device, the table shows the MAC address, BSSID, SSID, Channel, Rate, State (whether the
device is allowed to communicate with the wireless access point or not), Type, AID, Mode, and
Status.
Note: A wireless network can include multiple wireless access points, all using the same
network name (SSID). This enables extending the reach of the wireless network
and allows users to roam from one access point to another, providing seamless
network connectivity. Under these circumstances, be aware that only the stations
associated with this access point will be presented in the Available Station List.
3-16
Description
The Multicast packets sent and received in 802.11n/g mode since the
WNDAP350 was restarted.
The Wireless packets sent and received in 802.11n/g mode since the
WNDAP350 was restarted.
The Wireless bytes sent and received in 802.11n/g mode since the
WNDAP350 was restarted.
The Unicast packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
The Broadcast packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
The Multicast packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
The Wireless packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
The Wireless bytes sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
v1.1, November 2009
Management