Enabling Rogue Ap Detection - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
To view the Available Wireless Stations List:
1. Under the Monitoring tab, select Wireless Stations on the main menu. The Available
Wireless Stations list displays, as shown in
Figure 3-13 Available Wireless Stations list
2. Click Refresh to update the list.
Tip: If the wireless access point is rebooted, the table data is lost until the wireless
access point rediscovers the devices. To force the wireless access point to look
for associated devices, click the Refresh button.

Enabling Rogue AP Detection

The WNDAP350 can detect rogue APs and wireless stations and show their details to the
administrator.
To enable Rogue AP Detection:
Management
Figure 3-13.
v1.1, November 2009
3-17