Packet Capture - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
1. Under the Monitoring tab on the main menu, select Rogue AP. Select Known AP List.The
following screen displays with a list of known APs:
Figure 3-16 Known APs list
2. Click Refresh to refresh the list.
3. Click Save to export the list of known APs to a file. A window opens so you can browse to the
location where you want to save the file.

Packet Capture

The packet capture option is available under the Monitoring > Packet Capture tab. Use this
option for troubleshooting association problems. You can capture all packets transmitted and
received by the AP and save them in
WireShark or OmniPeek.
Management
format for analysis by any standard sniffer tool such as
pcap
v1.1, November 2009
3-21