Advanced Wireless Settings; Wireless Station Access Control - NETGEAR MBR1515 User Manual

Advanced Wireless Settings

From the main menu, select Advanced > Advanced Wireless Settings to display the
following screen:
Field
Enable Wireless Router Radio
Fragmentation Length, CTS/RTS
Threshold, and Preamble Mode
Router's PIN
Disable Router's PIN
Keep Existing Wireless Settings
Set Up Access List

Wireless Station Access Control

By default, any wireless computer configured with the correct SSID and wireless security
settings is allowed access to your wireless network. You can use wireless access point
settings in the Advanced Wireless Setting screen to further restrict wireless access to your
network:
LTE Broadband 11n Wireless Router MBR1515
Description
Selected by default, this setting enables the wireless radio, which
allows the router to work as a wireless access point.
Turning off the wireless radio can be helpful for configuration,
network tuning, or troubleshooting.
These settings should be left at their default settings.
The PIN number used for Push 'N' Connect.
By default, this check box is cleared. This setting allows the WPS
clients to discover the router's PIN.
By default, this check box is cleared. This setting allows the router to
automatically generate the SSID and WPA/WPA2 security settings
when it implements WPS. After WPS is implemented, the router
automatically selects the Keep Existing Wireless Settings check
box so that your SSID and wireless security settings remain the
same if other WPS-enabled devices are added later.
Access control is disabled by default so that any computer
configured with the correct SSID can connect. See
by MAC Address
Advanced
54
on page 55.
Restrict Access