NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 121

Prosafe dual band wireless-n access point
Hide thumbs Also See for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point:
Table of Contents

Advertisement

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
| | | | |-dtim-interval
| | | | |-extension-protection-spacing
| | | | |-fragmentation-length
only)
| | | | |-guardinterval
transmissions)
| | | | |-knownap-add
| | | | |-knownap-del
| | | | |-macacl>
| | | | | |-add
| | | | | |-del
| | | | |
| | | | |-macacl-add
| | | | |-macacl-database
database
| | | | |-macacl-del
| | | | |-mcsrate
| | | | |-mode
| | | | |-operation-mode
| | | | |-power
| | | | |-radio
| | | | |-rate
| | | | |-rifs-transmission
different transmit powers
| | | | |-rogue-ap-detection
| | | | |-rts-threshold
| | | | |-security-profile>
| | | | | |-1>
| | | | | | |-authentication
| | | | | | |-encryption
| | | | | | |-hide-network-name
| | | | | | |-key1
| | | | | | |-key2
| | | | | | |-key3
| | | | | | |-key4
| | | | | | |-keyno
| | | | | | |-name
| | | | | | |-presharedkey
| | | | | | |-security-separation
communication
| | | | | | |-ssid
| | | | | | |-status
| | | | | | |-vlan-id
| | | | | | |-wep-pass-phrase
| | | | | | |-wepkeytype
| | | | | |
| | | | | |-2>
| | | | | | |-authentication
Command Line Reference
--wireless DTIM period in beacon interval
--wireless extension protection spacing
--wireless fragmentation threshold(even
--interval (from interference from other
--add known access point
--delete known access point
--modify wireless access control (ACL)
--add wireless access control (ACL)
--delete wireless access control (ACL)
--add wireless access control (ACL)
--delete wireless access control (ACL)
--delete wireless access control (ACL)
--transmit data rate
--enable wireless access control (ACL)
--wireless operation mode
--wireless transmit power
--enable wireless radio
--wireless transmission date rate
--enable successive frame transmission at
--enable rogue access point detection
--wireless RTS/CTS threshold
--create security profile
--1st security profile
--authentication type
--data encryption
--hide network name
--wireless wep key 1
--wireless wep key 2
--wireless wep key 3
--wireless wep key 4
--key number
--profile name
--pre-shared key
--disable associated wireless client
--network name (1-32 chars)
--profile status
--VLAN id
--wireless wep passphrase key
--wireless wep key type
--2nd security profile
--authentication type
v1.1, November 2009
C-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wndap350-100nas

Table of Contents