Configuring Wpa-Psk - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual
Prosafe dual band wireless-n access point
Hide thumbs
Also See for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point:
- Reference manual (138 pages) ,
- Product data (2 pages) ,
- Application note (6 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Configuring WPA-PSK
Not all wireless adapters support WPA. Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 or above include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
Figure 2-21 Configure WPA-PSK
2-40
Basic Installation and Configuration
v1.1, November 2009
Advertisement
Table of Contents
