Restoring The Wndap350 To The Factory Default Settings - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Under the Maintenance tab on the main menu, select Upgrade, then select Restore Settings from
the sidebar to back up your current settings. The following screen displays:
Figure 3-6 Restore Configuration settings from file
1. Enter the full path to the file on your computer or click the Browse button to locate the file.
2. When you have located the file, click Restore to upload the file. After completing the upload,
the WNDAP350 will reboot automatically.

Restoring the WNDAP350 to the Factory Default Settings

It is sometimes desirable to restore the wireless access point to the factory default settings. This
can be done by using the Restore Defaults option, which restores all factory settings.
To access this function:
1. Under the Maintenance tab on the main menu, select Reset, and then select Restore Defaults
from the sidebar. The Restore Defaults screen displays, as shown in
3-8
v1.1, November 2009
Figure 3-7 below.
Management