NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 97

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Figure 4-5 Advanced QoS settings
The QoS options on the WNDAP350 are as follows:
• AP EDCA Parameters. Specify the AP EDCA (Enhanced Distributed Channel Access)
parameters for different types of data transmitted from the WNDAP350 wirelss access
point to the wireless client.
• Station EDCA Parameters. Specify the Station EDCA parameters for different types of
data transmitted from the wireless client to the WNDAP350 wirelss access point. If WMM
is disabled, you cannot configure Station EDCA parameters.
Table 4-1 describes the settings for QoS Queues.
Table 4-1. QoS Queues and Parameters
QoS Queue
Data 0 (Voice)
Data 1(Video)
Data 2 (Best Effort)
Advanced Configuration
Description
High priority queue, minimum delay. Time-sensitive data such as VoIP
and streaming media are automatically sent to this queue.
High priority queue, minimum delay. Time-sensitive video data is auto-
matically sent to this queue.
Medium priority queue, medium throughput and delay. Most traditional
IP data is sent to this queue.
v1.1, November 2009
4-9