Viewing Or Change Wireless Settings - NETGEAR WGT624 v4 User Manual

Viewing or Change Wireless Settings

To view or change wireless settings:
1. Log in to the router at http://www.routerlogin.net as described in
Wireless Router" on page
2. On the main menu, below the Setup heading, select Wireless Settings.
Figure 2-2
3. View or enter the wireless settings for the router.
• Wireless Network Name (SSID). The default SSID is NETGEAR. It is a good idea to
change this to a name that you can easily recognize in case there are other wireless
networks in your area. You can enter up to 32 alphanumeric characters.
Note: The network name (SSID) is case-sensitive. If NETGEAR is the network
• Region. The region where you are located. The Smart Wizard prompts for this during
installation. It might not be legal to operate the wireless features of the wireless router in a
region other than one of those identified in this field.
• Channel. The channel determines the operating frequency. The default channel is 11.
Wireless Security
1-2.
name (SSID) in your wireless router, you must enter NETGEAR in your
computer's wireless settings. Typing nETgear will not work.
v1.0, July 2008
Super G Wireless Router WGT624 v4 User Manual
"Logging In to Your
2-5