NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 63

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
.
Figure 2-23 Configure WPA-PSK and WPA2-PSK
To configure WPA-PSK and WPA2-PSK:
1. From the Network Authentication drop-down menu, select WPA-PSK & WPA2-PSK. By
default, Data Encryption will be set to TKIP+AES.
2. Enter the WPA Passphrase (Network Key).
3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
4. Click Apply to save your settings.
Basic Installation and Configuration
v1.1, November 2009
2-43