NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 44
Prosafe dual band wireless-n access point
Hide thumbs
Also See for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point:
- Reference manual (138 pages) ,
- Product data (2 pages) ,
- Application note (6 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Figure 2-13 Security Profile Settings
An overview of the information that is required to set up a Security Profile follows, including a
description of the Network Authentication choices that are available:
•
Profile Definition. Configure the following settings:
•
Security Profile Name. Use a name that makes it easy to recognize the profile, and to tell
profiles apart. (The default names are NETGEAR, NETGEAR-1, NETGEAR-2, and so
on.) You can enter a value of up to 32 alphanumeric characters.
Note: Only the first profile is enabled by default. The rest of the profiles are disabled
and must be enabled if configured.
•
Wireless Network Name (SSID). This is the name of your wireless network. It is set to
the default name of NETGEAR_11a for 802.11a/na and NETGEAR_11g for 802.11b/bg/
ng.
2-24
v1.1, November 2009
Basic Installation and Configuration
Advertisement
Table of Contents
