To Make A Copy; To Send A Document - Olivetti OFX 120 Instructions Manual

... FOR THE MAIN FUNCTIONS

TO MAKE A COPY ...

If this diagram is not enough for you:
→ → → → →
read the more detailed instructions below:
1
Make sure that the handset is on the hook:
0 7-FEB
2
DOCUMENT FEEDING
NORMAL STANDARD
3
Set the contrast , i.e. how light and dark areas
appear on the copy, as specified below:
• • • • •
NORMAL, if the document is neither too
light nor too dark :
NORMAL STANDARD
• • • • •
DARK, if the document is particularly light :
DARK
• • • • •
LIGHT, if the document is particularly dark :
2 LIGHT
4
Set the resolution , i.e. the definition of the copy,
as specified below:
• • • • •
FINE, if the document contains very small
characters or drawings :
NORMAL
→ → → → →
1 4 : 2 5
STANDARD
STANDARD
F I NE
- 16 -
• • • • •
HALFTONE, if the document contains
shaded areas :
2 NORMAL HALFTONE
NOTE
If you do not set the resolution, the copy will
be made automatically with the FINE setting.
5
Start making the copy:
COPY NORM
Once I have copied the document, I emit five
short beeps (lasting a total of about 5 seconds ):
during this time, you can insert another docu-
ment for copying. If you do not, I return to standby
mode:
0 7-FEB
NOTE
• • • • • Having made the copy, I always return to
the initial contrast and resolution settings
NORMAL and STANDARD, respectively.
• • • • • If you want to abort the copying opera-
tion in progress, press the
document will be unloaded automatically.

TO SEND A DOCUMENT ...

If this diagram is not enough for you:
→ → → → →
or
read the more detailed instructions below:
F I N
1 4 : 2 5
key: the
STOP
→ → → → → → → → → →