Transmission; What Documents May Be Used; To Send A Document; Document - Olivetti Fax-Lab S101 Instructions Manual

H
OW TO GET STARTED QUICKLY
T
RANSMISSION
If you follow the procedures described below, you can immediately use the fax machine to carry out simple transmission operations. In
any case, if these procedures are not enough for you, see the "Transmission and reception operations" chapter, which provides a detailed
description of all the transmission modes and other dialling procedures (one-touch and speed dialling, etc.) for which the fax machine has to be set
up (see "To set one-touch and speed dialling").
W
HAT DOCUMENTS MAY BE USED
For any type of transmission, the document has to be placed in
the automatic document feeder (ADF).
CHARACTERISTICS OF THE ORIGINAL
• Width 210 mm
• Length 105 mm - 600 mm
• Unit weight 70 - 90 gr/m
Place the document in the automatic document feeder (ADF) with
the side to be sent face down.
IMPORTANT
If you do not perform any operation within about one
and half minutes of inserting the document in the au-
tomatic document feeder (ADF), the fax machine will
automatically unload the document from the feeder.
XII
2 (max. 5 sheets)
T
O SEND A DOCUMENT
If these diagrams are not enough:
è
see "To send a document", section "Transmission and
reception operations".
T
O HEAR THE DIALLING TONE WHEN
SENDING A DOCUMENT
If these diagrams are not enough:
è
see "To send a document", section "Transmission and
reception operations".
T
O SEND A DOCUMENT WITH THE RECEIVER
RAISED
If these diagrams are not enough:
è
see "To send a document", section "Transmission and
reception operations".
è
è è
è è