AT&T MERLIN LEGEND Communications System PBX System Planning Manual page 85

Trunks
T1/ISDN-PRI Planner
3-30 Trunk Options
To ensure compatibility with your system, all local offerings of DS1 configura-
tions must be reviewed by AT&T National Technical Marketing (NTM) personnel.
This review begins when NTM receives the "General Business Systems T1/lSDN-
PRI Planner" (pages 5 through 7 of PBX System Form 3c).
Planning Form Instructions
On page 5 of Form 3c:
1.
Fill in the customer name, telephone number, and address.
Note: "Reference Number" is used by NTM.
2.
Fill in the AT&T DOSS Order Number.
3.
Identify the AT&T personnel handling the account: Account Executive's
name and telephone number and the System Consultant's name and
telephone number.
4.
Identify the DS1 facility provider by writing the provider's name in the
"T1/ISDN-PRI Vendor" space along with the contact person's name and
telephone number.
5.
Under the "Installation heading:
Write the date the installation is due to be complete.
Write the date the equipment is scheduled for delivery to your
Write the date the equipment is scheduled for delivery to your
company next to the "Materials-on-Job-Date."
6.
Under the "AT&T Installation Contacts" heading:
List the names and telephone numbers of the AT&T personnel
responsible for the equipment order and its installation: the Order
Implementor, the National Technical Marketing Manager, the National
Technical Service Center Engineer, and the Data Services Organization
Manager.
7.
Under the question about whether the order has been placed:
Check "Yes" if the order has been made and fill in the date.
"Yes" if the order has been made and fill in the date.
Check
Check "No" if the order has not been placed.
8.
On page 6 or Form 3c, complete one block for each 100D module.
Transfer the options information for each module from the corresponding
column of page 1 of Form
Service Ordered or Planned (Type of Service)
Frame Format
Line Coding (Suppression)
Line Signaling Mode
Synchronization Timing (Clock Synchronization: Source)
3c: