AT&T MERLIN LEGEND Communications System PBX System Planning Manual page 131

Features
Group Type
4-26 Group Assigned Features
Group Type determines whether or not the system automatically logs in
members of a calling group following a power failure. The factory setting is no
automatic system Iogin (auto Iogout).
You can change the factory setting to one of the following:
Auto Login. Use this setting when a Call Management System (CMS) is
connected to the system to specify that the system automatically logs in
calling group members following a power failure and does not log out users
who do not answer a call. This setting is also used for calling groups used for
data (called data hunt groups). See the Data Guide for more detailed
information.
Integrated VMI. Use this setting when a voice messaging system such as
AUDIX Voice Power—lS II or MERLIN MAIL Voice Messaging System, which
requires special signaling for integrated operation, is connected to one or
more station jacks assigned to a calling group. The system automatically
logs in the group members following a power failure.
Generic VMI. Use this setting when a voice messaging system such as
MERLIN Attendant or Integrated Voice Power Automated Attendant-lS II,
which does not require special signaling, is connected to one or more station
jacks assigned to a calling group. The system automatically logs in the group
members following a power failure.
Planning Form Instructions
Under the "Group Type" heading on Form 6e:
1. Check "Auto Logout" to keep the factory setting of no automatic login.
2 . To change the factory setting from Auto Logout:
Check "Auto Login" to show automatice login for a CMS or a data
station.
Check "Integrated VMI" to show automatic login for a voice messaging
system that requires special signaling for integrated operation.
Check "Generic VMI" to show automatic login for a voice messaging
system that does not require special signaling.