Table of Contents
Advertisement
Features
System Features
See System Reference for more
information on system features.
Transfer of Calls Options
Transfer Return Interval
One-Touch Transfer
System features affect all users and all or most of the telephones. Record your
decisions about them on PBX System Form 6f, System Features.
The Transfer feature allows users to transfer outside or inside calls to another
telephone through the following options:
Transfer Return Interval
One-Touch Transfer
Transfer Audible
Type of Transfer
The Transfer Return Interval is the number of rings before a call transferred to
another telephone is returned to the person transferring the call.
The factory-set number of rings
nine rings or change the setting to zero if you do not want the calls to return to
the original telephone.
Planning Form Instructions
Under the "Return Time Interval" heading in the "Transfer Options" section of
Form 6f, do one of the following:
Check "4 rings" to keep the factory setting.
Check "0 rings" to indicate no return for transferred calls.
Check the third box to change the factory-set number of rings. Write the
number of rings in the space provided.
When the system is set up, it is set for One-Touch Transfer, which allows users
to transfer calls to another person by pressing a preprogrammed Auto Dial
button or DSS button for that person. You can change this option to One-Touch
Hold so that people must use the Transfer button to initiate transfers.
If you decide to keep One-Touch Transfer, decide whether transfer completion
is manual or automatic:
Automatic completion (the factory setting) means that transfer is initiated and
completed by pressing the Auto Dial or DSS button.
Manual completion means that the person transferring the call can consult
with the other person, and then complete the transfer by pressing another
button (after pressing the Auto Dial button or DSS button).
four. You can change the setting to one to
IS
System Features 4-27
Advertisement
Table of Contents
