AT&T MERLIN LEGEND Communications System PBX System Planning Manual page 127

Hybrid/pbx communications system
Table of Contents

Advertisement

Features
Hunt Type
4-22 Group Assigned Features
Planning Form Instructions - Continued
4 . To change the factory-set extension number:
Write the new number in the "Renumber To" space.
Locate PBX System Form 2d, System Renumbering - Special
Renumbers and write the Group ID and new number in the
"Renumber To" column of the "Group Calling" section of that form.
5 . In the "Stations" area of Form 6e, write the extension number of each
member of the group in the "Ext No." column and the name of the person
of location in the "Person or Location" column. (Refer to Form 2a.)
Note: Before you complete the extension number and name entries, read
the "Hunt Type" instructions that follow.
6 . In the "Trunks" area of Form 6e, for each trunk that is to ring directly into
the calling group, write the trunk number next to the logical ID. (Refer to
Form 2c.)
If assigning a calling group as backup for a queued call console, mark PBX
System Form 6a, Optional Operator Features.
7.
Write the extension number of the calling group under the "Position Busy
Backup" heading in the "Queued Call Console" section.
The following options are available for a calling group:
Hunt Type
Delay Announcement
Message-Waiting Receiver
Calls-in-Queue Alarm Threshold
External Alert for Calls-in-Queue Alarm
Overflow Coverage
Overflow Threshold
Group Type
Use the "Calling Group Options" section on the back of each copy of
Form 6e to record each option. Copy the Group No. and ID from the front of
the form.
Hunt Type allows you to change the hunting pattern from the factory-set circular
type to linear. The system then searches for an available telephone in the order
that telephones are assigned to the calling group.
If you choose linear hunt, be sure you have listed the extension numbers and
names in the 'Stations' area on the front of Form 6e in the order that you want
the group searched. If you have not done this, go back and correct the front of
the form so that the extensions are in the right order.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin legend511a

Table of Contents