AT&T MERLIN LEGEND Communications System PBX System Planning Manual page 257

Index
QCC Extended Call, 4-10
Automatic Hold
DLC, 4-6
QCC, 4-7
Automatic-in tie trunk pooling, 3-14
Automatic Maintenance Busy, 2-11
Automatic Number Identification service, 3-18
Automatic Release for QCC, 4-7
Automatic Route Selection, 4-41
line button assignment and, 3-47
Automatic tie trunk
QCC queue priority, 3-10
Automatic-start tie trunk, 3-37
Auxiliary equipment, trunk jacks for, 3-5
AVP. See AUDIX Voice Power — IS Il.
B
B-channel groups
with PRI facilities, 3-29
B-channel groups with PRI facilities
telephone number and, 3-25
test telephone number and, 3-26
B8ZC. See Bipolar 8 zero substitution.
Backboard composition and dimensions, 1-6
Backup clock synchronization, 3-22
Backup (overflow) coverage for a calling group, 4-25
Backup On button on QCC, 3-10
Backup, QCC Position Busy, 4-10
Barrier codes, Remote Access, 3-14
Basic carrier
dimensions, 1-6
sample diagram of, 2-8
Basic telephone. See sing/e-/ine te/ephone.
Basic telephone station jack, 2-13
Behind Switch mode, 2-10
Bipolar 8 zero substitution, 3-20
C
Call Accounting System
SMDR and, 4-31
Call Completion, QCC Extended, 4-10
Call Forward, Remote, 4-3
Call Forward with Remote Access, 3-11
Call Length option with SMDR, 4-31
Call Management System
auto Iogin for, 4-26
extension number assignment to, 2-21 , 2-23 , 2-26
Extension Status configuration for, 4-30
module used to connect, 2-13
station jacks for, 2-15
IN-2
Call Park
codes, 4-13
Return Time, 4-29
Call pickup groups, 4-14
Call Report Format option with SMDR, 4-31
Call Restrictions, 4-2
Call types, directing calls to QCC by, 4-11
Callback, Automatic, 4-29
Remote Access eligibility for, 3-11
Calling group. See Group Ca//ing.
as receiver for Group Coverage, 4-18
delay announcement, 4-23
explanation of, 4-20
labeling, 4-38
redirecting calls to, 4-32
Calls Reported option with SMDR, 4-31
Calls-in-Queue Alarm Threshold, calling group
external alert for, 4-24
Calls-in-Queue Alarm Threshold for calling group, 4-24
Calls-in-Queue Alert, QCC, 4-8
Camp-On Return Time, 4-29
Canadian Department of Communications
notification, viii
Capacity, trunk and station, 2-5
Capacity, module, 2-4
Carrier, basic and expansion
definition of, 1-3
dimensions, 1-6
sample diagram of, 2-8
CAS. See Call Accounting System.
Channel service unit
explanation of, 3-16
Line compensation and, 3-21
T1 emulation and, 3-24
zero code suppression and, 3-20
Circular Hunt Type for calling groups, 4-22
Class of restriction, Remote Access, 3-13
Clock synchronization for DS1 facility, 3-22
CMS. See Call Management System.
Common-channel signaling, 3-24
Communication Survey, Employee
form, 1-8
sample analysis of, 1-10
Components, system, 1-1
Connecting
stations, 2-19
stations, 2-13
trunks, 3-1, 3-6
Console. See direct-line console, queued call console and
system programming console.
Control unit
definition of, 1-3
environmental requirements for, 1-5
module placement in, 2-6
sample diagram of, 2-8
Control Unit Space Requirements for, 1-6
Counters, PRI timers and, 3-27