Exiting Cms 4 - AT&T Merlin II Feature Module 2 Installation Ans Getting Started Manual

EXITING CMS
46 Step 7: Building a Shift Configuration
Before you begin the system tests in the next section, exit CMS and turn off
your PC as follows:
1 To return to the Configuration screen from the Call Flow screen, press
(labeled "Config Screen").
(F7)
The Configuration screen's function keys replace the Call Flow screen's
function keys.
To go from the Configuration screen to the Administration Menu, press
2
(labeled "Admin Menu").
(F8)
The Administration Menu's function keys replace the Configuration
screen's function keys.
You can save changes and rename configurations from this menu
NOTE:
at this time.
To go from the Administration Menu to the CMS Main Menu, press
3
(labeled "Exit Admin").
A series of prompts appear on the Administration Menu's prompt line
asking you to if you want to save the entries you made in your
configuration, and asking you to confirm your request to leave CMS
administration. When you have responded by typing a
(labeled "Enter Data") at the final confirmation prompt, the CMS
(F8)
Main Menu replaces the Administration Menu on the screen.
4 Press (labeled "Exit to DOS") to exit to DOS.
(F8)
The CMS Main Menu disappears and the
5 Turn off your PC.
and pressing
Y
appears.
C>
(F8)