Table of Contents
Advertisement
Live Mode
To set values for live video display, use the UP and DOWN controls to navigate through the
menu items. Change the value of the menu item using the LEFT and RIGHT controls.
Figure 3-3
Follow
Table 3-3
to set the Live Mode parameters.
Table 3-3
Field
OSD
SEQUENCE
SEQ-DWELL TIME
SCREEN
CROPPING
TRANSPARENT
CHANNEL
DISPLAY
SEQ LIST
BRIGHTNESS
CONTRAST
HUE
SATURATION
Recording Mode
To set values for recording video, use the UP and DOWN controls to navigate through the
menu items. Change the value of the menu item using the LEFT and RIGHT controls.
Rev 3.01
Live Mode Setup Screen
Live Mode Setup Fields
Description
Enables/disables on-screen display.
Enables/disables sequential display of video in Full Screen mode.
Sets the Dwell time for each channel display in Sequential Display
mode (choose from 1–60 seconds).
Enable/disable cropping to make the display fit the screen.
Changes the transparency level of the on-screen display.
Selects the channel (camera 1–4) for applying the following six
settings. Any changes you make immediately take effect with the
selected channel.
Press SEL to enter a text insertion screen and apply a new name for
the channel. Use the LEFT and RIGHT arrow controls to navigate
through the channel name and the UP and DOWN arrow controls to
change the selected character. Press SEL to confirm the name.
Enables/disables display of the video channel in Live Display mode.
Enables/disables the specified channel to be included in the
Sequential Display mode.
Changes the brightness of the specified channel.
Changes the contrast of the specified channel.
Changes the hue of the specified channel.
Changes the saturation of the specified channel.
14
Document 900.0399
08/08
Advertisement
Table of Contents
