Figure 3-14 Time Sync Screen - Honeywell HRSD40F User Manual

Configuration
Synchronizing with a Standard Time Server
You can set up time synchronization between the DVR and standard time servers that
are available in most time zones and countries, or between the DVR and another DVR.
1.
2.
3.
4.
Last Time-Synch displays the last time the DVR was synchronized with the time server.
5.
Document 800-03097 Rev C
03/09
Note Holidays that do not fall on the same date each year should be
updated after the current year's holiday has passed.
Select the Time Sync tab in the Date/Time Setup screen, and press
Time Sync screen appears.
Figure 3-14
Highlight the field beside Automatic Time Sync and press
Automatic Time Sync On and Off.
Highlight the field beside Time Server and press
so that you can enter the IP address or domain name of the time server.
Note You can use the domain name instead of the IP address if you
set up the DNS Server when you set up the LAN.
Highlight the field beside Interval and press
synchronization from 30 minutes to 1 day.
Highlight Run as Server and press
to On, the DVR you are setting up runs as a time server.
Time Sync Screen
to toggle between On and Off. When set
to toggle the
. A virtual keyboard appears
. Set the time interval for
. The
49