Event Recording Mode - Honeywell V2.X Installation Manual

Event Recording Mode

In order to achieve the best performance from the HRGX during a video verification event, the recording parameters
must be configured. Both the "Record" menu and the "Substream" menu have parameters that need to be configured.
To locate these options, select "Record" from the main menu and then choose "Encoding" at the left.
The "Record" submenu is shown below. Note that there are two columns. One is for the Normal stream and the other is
for the event. Both columns need to be configured identically.
1. Set the Stream type to Video
2. Resolution to 2CIF
3. Bitrate Type to Variable
4. Video Quality to Medium
5. Frame Rate to 15fps
6. Max Bitrate Mode to General
7. Max Bitrate(Kbps) to 512
Honeywell HRGX Series Installation Guide rev 2.X I-View Now, LLC. All Rights Reserved. © 2014 Page 19