Scan To Digital Input On Dt 100/120; Copy Input For Multiple Page Tiff Files; Rip Input - Xerox 6100BD - Phaser Color Laser Printer System Manual

Printing

Scan to digital input on DT 100/120

Copy input for multiple page TIFF files

RIP input

4-14
For highlight color, the single-page TIFF format that includes
two images per page (black and highlight color) is supported.
Only DT100/120 has the capability to use the Scan interface
and save a file. This feature enables the operator to scan a
file, browse a file path to save the job and specify a name for
the saved file. In saving, the operator is limited to these file
formats:
• PDF
• Single Page TIFF
• Multi Page TIFF
From the Copy user interface, the operator can Save, Print or
Save Print multiple pages in TIFF format. The job is saved or
printed per operator selection.
If the option is to save, the Save Facility calls the Save Job
Library to save the job in TIFF format.
NOTE: If the product being used supports a scanner, any
image related to the job is saved without the image
manipulation that was programmed in the job
submission.However, the instructions is stored in the Saved
Job Ticket to be used in job programming when reprinting.
In saving, the operator is limited to these file formats:
• PDF
• Multi Page TIFF
• Single Page TIFF
From the RIP input path, the operator chooses Save, Print
and PrintSave. The input facilities (CDF or Scan Facility) call
the Common Buffer Manager to generate saved and print-
ready images for color or black and white products.
The print-ready images are sent to the Phoenix image disk
while the save images are sent to Save Facility for
consumption.
System Guide