Rebooting And Restarting - Xerox 6100BD - Phaser Color Laser Printer System Manual

Troubleshooting

Rebooting and restarting

8-16
5. Enter: g j ,the job number from Job GUI
6. The job attributes display.
NOTE: For detailed procedures see the Online Help.
Recovery procedures throughout this guide instruct you to
either reboot or restart the software.
To reboot the system and perform a file system check,
perform the following:
1. Place your mouse cursor in the background outside of the
DocuSP Print Services window.
2. Right-click and select [Programs].
3. Select [Terminal].
4. Put your mouse cursor in the window and type: su
5. Select Enter.
6. Type in your root password.
7. Select Enter. A # symbol displays.
NOTE: When entering text, do so in lower-case because
UNIX is a case sensitive system.
8. Type: sync; sync; halt
9. Select Enter. The system reboots.
10. A Program Terminated message and an OK prompt
display. Type boot -s
11. Select Enter. The system reboots.
12. When you receive the following message, Type Ctrl-d to
proceed with a normal startup, (or give root password for
system maintenance) type the root password again.
13. Select Enter.
14. Select the Ctrl and d keys on your keyboard at the same
time to complete the boot.
NOTE: This procedure performs the file check and takes
about one minute. The # symbol appears again.
If there are problems starting the software, check the
console window for messages.
System Guide