Configuring Xjdc/Unix; Xjdc Hints And Tips - Xerox 6100BD - Phaser Color Laser Printer System Manual

Troubleshooting

Configuring XJDC/Unix

XJDC hints and tips

8-18
The configuration file, CONFIG.TXT found in the directory /
opt/XRXnps/bin/, contains default parameters for the
invocation of XJDC. The text file can be edited using any
simple text editor.
The first line of the configuration file must not be edited; it
contains XJDC version information. Each subsequent line
contains a single option; any text following the first word, and
any invalid options, are ignored. Options may be repeated or
contradicted on following lines; the last option specified
overrides previous options. The following sample
configuration file is provided:
XJDC VM10 PDL Compiler
REPLACE
NODISPLAY
PRINT
TRUNCATE
LABEL
COMPILE
SINGLEBYTE
VM10
PAPERSIZE=USLETTER
DATE=US
PAGINATE=60
OUTPATH =/opt/XRXnps/resources/lcds
• If the config file needs to be changed, modify the /opt/
XRXnps/XRXXJDC/data/CONFIG.TXT file. Otherwise, the
default setting in the CONFIG.TXT file takes effect.
• An example for the syntax /opt/XRXnps/bin/XJDC
filename would be: /opt/XRXnps/bin/XJDC /home/
XDJCtest/BASIC.JSL where the filename is represented
by /home/XJDCtest/BASIC.JSL
• The output files are stored under the OUTPATH directory
which is specified in either /opt/XRXnps/bin/CONFIG.TXT
file or command line. For example, if OUTPATH is /opt/
XRXnps/temp/, then all the output files are put in the
directory of /opt/XRXnps/temp.
System Guide