Docusp Router Capabilities Disabled; Security Warning Banners; Disabling Lp Anonymous Printing; Remote Shell Internet Service - Xerox 6100BD - Phaser Color Laser Printer System Manual

DocuSP router capabilities disabled

Security warning banners

Disabling LP anonymous printing

Remote shell internet service

enable-ftp and disable-ftp scripts

System Guide
The DocuSP router capabilities is disabled (empty / etc/
notrouter file created).
Security warning banners are displayed when a user logs in
or telnets into the DocuSP server. This message explains
that only authorized users should be using the system and
that any others face the possibility of being monitored by law
enforcement officials.
NOTE: DRW (DocuSP Remote Workflow) is not impacted by
security settings.
You can choose to disable anonymous printing on all existing
LP printer queues that are associated with the DocuSP virtual
printers. When anonymous LP is disabled, only systems that
have their IP address in the DocuSP controller /etc/hosts
table are authorized to submit LP requests. Answer y for yes
to disable this printing option.
If you are using the legacy Xerox print command line client
(the software is not distributed with this release), you will
need to use the remote shell internet service to transfer files
to the DocuSP controller. However, if you are not using the
print command line client, it is strongly recommended that the
remote shell internet service is disabled. When these three
questions are answered, all remaining aspects of the High
security setting are implemented.
These scripts allow for enabling and disabling FTP alone.
You must have FTP enabled when using a Continuous Feed
system, or DigiPath Production Print and NetAgent.
FTP is also required for the iGen Call for Assistance (CFA)
feature. This uses FTP to push IOT logs and a DocuSP
outload back to the DocuSP controller.
Security and Network Setup
3-11