Supported Tiff Tags - Xerox 6100BD - Phaser Color Laser Printer System Manual

Printing

Supported TIFF tags

4-10
• DocuTech 61xx -- The DocuTech 61xx finishes the trail
edge of the pages and orients the image appropriately.
• DocuTech/DocuPrint 75/90 -- The DocuTech/DocuPrint
75/90 finishes the lead edge of the pages and orients the
image properly.
This difference can result in PostScript/VIPP files that call
Decomposition Service TIFFs being incompatible across the
different platforms. The imported TIFFs may print with a
different orientation relative to the PostScript image.
Prior to DocuSP 3.1, the controller utilized a conversion tool
(TIFF to PostScript) to process and print TIFF files. A native
TIFF decomposer has now been implemented to directly
process TIFF files for printing. This improves the TIFF
printing performance for certain types of files. Decomposer
level adjustments are also now available for the TIFF
decomposer at the Queue level.
NOTE: Multipage TIFF files are now supported. Single TIFF
files can now contain multiple TIFF images to be processed
and printed.
Below is a list of the TIFF tags supported by the DocuSP
software.
Compression
– Default = 1
– DocuSP supports values of 1 (uncompressed), 2 (CCITT
Modified Huffman RLE, 32773 (PackBits), 3 (CCITT
Group 3), and 4 (CCITT Group 4).
T4 Option
– Default = 0
– This is used to determine CCITT Group 3 one or two
dimensional coding.
Fill Order
– Default = 1
– DocuSP supports values of 1 and 2.
Image Width and Image Length
– Default = none; values must be supplied.
Orientation
– Default = 1
System Guide